The AIR GRIND extraction table with integrated filtration system is a compact workplace solution for grinding dust, welding fumes, angle-grinding work, deburring, and polishing. The extraction system, filter unit, and sound-insulated fan are integrated directly into the table, allowing emissions to be captured through the working surface and rear-wall extraction system, filtered, and discharged in a controlled manner.
The extraction table is particularly suitable for individual workstations, workshops, and production areas where no central extraction system or extensive ductwork is to be installed. The AIR GRIND is a plug-and-play extraction table with an integrated filtration system for NON-ATEX areas and is available with working surfaces ranging from 1.5 to 2.5 metres.
The combination of rear-wall extraction, table surface, pre-filter, IFA/BGIA filter cartridges, dust drawer, and sound-insulated fan creates a compact solution for clean air directly at the workplace.
Operating Principle of the AIR GRIND Extraction Table
An extraction table with an integrated filtration system operates directly at the point where emissions are generated. With the AIR GRIND, dust and fumes are captured through the table surface and the rear-wall extraction system. The contaminated air then passes through the various integrated filter stages.
- Settling chamber in the rear wall
- Settling chamber beneath the table
- Pre-filter
- Cartridge filter system
Selecting the appropriate filter is crucial to the subsequent performance of the system. Depending on the application, coarse filters, cartridge filters, coated filter media, or additional filter combinations may be suitable. Dust and particles are separated mechanically; for special requirements, additional filtration solutions can be evaluated on a project-specific basis.
To ensure permanently reliable extraction performance, the filters must be inspected, cleaned, or replaced regularly. The AIR GRIND facilitates this through accessible maintenance areas, a dust drawer, a pre-filter, and an automatic or optionally differential-pressure-controlled cleaning system. The product documentation identifies the pre-filter, dust drawer, filter cartridges, compressed-air tank, cleaning-system controller, and main switch with motor protection as central components.
Applications of the AIR GRIND
The AIR GRIND is used wherever emissions are generated directly at a manual or semi-automatic workstation. The extraction table is particularly suitable for grinding, deburring, polishing, and angle-grinding work where dust and particles should be prevented from entering the factory air.
Benefits for Operators and Users
The AIR GRIND is suitable for companies looking for a flexible extraction solution for individual workstations that is ready for immediate use. Because the filtration technology and fan are integrated into the table, extensive ductwork installation is unnecessary in many cases. This makes the extraction table particularly suitable for workshops, small production areas, reworking stations, or changing production situations.
During polishing and angle-grinding work, dust, abrasion particles, and fumes may be generated in the immediate vicinity of the operator. The AIR GRIND captures the contaminated air directly at the workplace and directs it into the integrated filtration system. Optional working-surface covers and side walls allow the workstation to be adapted to the specific application. For welding-fume applications in NON-ATEX areas, the AIR GRIND can provide a decentralised solution when no central ductwork system is to be used. The combination of table extraction, rear-wall extraction, and cartridge filtration supports effective contaminant capture directly at the workplace.
AIR GRIND – Extraction Table for Dust Applications and Welding Fumes
The AIR GRIND is particularly useful when extraction is required directly at the workplace but no central extraction system is available or is intended to be installed. The table combines the working surface, contaminant capture system, filtration technology, and fan within a single unit. This allows it to be integrated quickly into existing production areas.
This design provides a major advantage at individual grinding, deburring, or polishing workstations: emissions are captured where they are generated, through the working surface and the rear-wall extraction system. This reduces the spread of dust throughout the room and supports clean working conditions.
AIR GRIND 20 ΔP Extraction Table
AIR GRIND 25 ΔP Extraction Table
